mn Electronic GmbH - smd productions systems

mn Electronic GmbH - smd productions systems

>> Products >> Pick&Place >> Place_it

place_it

place_it1

The SMD pick-and-place machine works after the pick-and-place principle. place_it removes the components from the feeder and precisely sets them onto the programmed positions. place_it is able to work up a large spectrum of components. place_it is deliverable with dispenser for glue and solder paste and a wafer tray (tableau) for try packed components. You can buy place_it for favourable prices in sets.

place_it1_girl

Characteristics:

  • Ready to be plugged in
  • Compact construction
  • Simple handling and programming
  • Quick product exchange
  • Internal, buffered data memory (RAM) for up to 64 various in-line assembly programs
  • Control of the presence of the components by vacuum sensor
  • 4 pliers centering system on the mounting head
  • automatic exchange of the nozzles
  • programmable compression for set-up
  • positioning of components in all angular positions
  • integrated vacuum pump
  • glas ruler controlled positioning into X, Y and Z direction
  • integrated error diagnostic system
  • 16 possibilities to center components
  • programmable depression threshold
place_it1_head place_it1_feeder_a place_it1_feeder_b

place_it needs:

Computer with operating system DOS or Windows and storage capacity of at least 512KB, RS 232 interface, RS 232 transmission cable

Technical data:

Measures: 1547 x 1150 x 610 without tableau (wafer tray)
1897 x 1150 x 610 with tableau (wafer tray)
Weight: Approx. 120 kg without packing and feeders
Mains connection: 230 V / 50 Hz / 4 A
Ambient temperature: 15°C - 40°C
Pick-and-place area: 350 x 240 mm
Workable components: 1.2 x 1.8 x 0.4 mm to 30 x 30 x 6 mm (0805 up to PLCC 68)
Component feeding: 45 feeders
Workable packings: actually 8, 12, 16, 24 and 32 mm belt feeder, common IC-components in bars (up to PLCC 68), trays
Capacity of in-line assembly: approx. 1800 components/h
Capacity of dispenser: Approx. 1 point/s
Component presence control: by vacuum sensor
Set-up compression: 6 programmable levels
Angles of in-line assembly: 0 - 360° in 0.1 ° steps
Precision of positioning: +/- 0.2 mm
Precision of re-run: +/- 0.1 mm
Utilization ratio of in-line assembly: max 99 printed circuit boards with automatic program doublicating
Amount of in-line assembly positions: max 500 per printed circuit board
LCD macghine display: 4 x 20 lines
indicated are: product identification, component identification, printed board number, feeder number, nozzle number, error message, machine and dispenser data, try status
Interface: 9-pin D-Sub, RS 232
Deliverable accessories: dispenser station, tableau (wafer tray), digital display, table, MS-DOS program for pattern and recongition, linear vibration feeder for surface mount components in plastic tubes


Software:

place_it1_soft


Advantages of the new software

  • New, modern and easy user interface that works under Microsoft® Windows® operating system
  • Works with all place_it machines
  • Supports old PLACER files
  • Visually displays the project data
  • Dispenser can be enabled or disabled for each component
  • Prints the project or library data
  • There are new ways to sort the components for assemble (for example by height of the case)
  • Supports new EPROM with increased data transfer speeds

Demonstration version of the software will let you to test all the features except saving, printing or sending files to the machine. The only communications feature which is allowed in the demonstration version is downloading of the machine directory. Download the file, then unzip it into any directory and then start the Setup.exe file which will install the application on your computer. Uninstall support is included. Demonstartion version is installed separately from the real work version so testing and uninstalling it will not corrupt the working software. Download the documentation where you can read how to use the software.

Download the software:


Demonstration version of the Place_it_VV. Read the description above how to install this software. place_it_vv_demo.zip 309 KB
Documentation for Place_it_VV (Revision 013) place_it_vv.zip 805 KB
Latest update of Place_it_VV Read Support page


 

place_it II and place_it II Vision

place_it_II

 

The SMD pick - and - place machine operates according to the pick - and - place principle and is PC-controlled. place_it removes the components from the feeder and precisely sets them onto the programmed positions. place_it is programmed via easy - to - understand Windows user masks. place_it processes a wide range of components.

 

place_it II vision features a vision system for teach-in, an optical, contactless component centering device, and an automatic recognition of the positions of the printed circuit board and the components. place_it can be supplied with a dispenser station and a wafer tray for tray-packed components. You can buy place_it at favorable prices in sets.

 

place_it_II_girl

Features:

 

  • Ready to be plugged in, including PC and monitor
  • Compact design
  • Simple operation through programming on Windows environment
  • Quick product change
  • PC-controlled (comes with PC)
  • Assembly programs and data can be stored on hard disk or diskette
  • Control of presence of components by vacuum sensor
  • Automatic tool change
  • Programmable compression for set-up
  • Positioning of components in all angular positions
  • 4-plier centering system on the mounting head (place_it II only)
  • Integrated vacuum generation
  • Integrated error diagnostic system
  • Programmable Z-axis
  • Multiple-panel programming
  • Integrated dispenser
  • CAD data import

place_it_II_feeder_a place_it_II_head place_it_II_feeder_b

 

place_it II can be retrofitted Into place_it II vision, even subsequently.

 

  • place_it II vision only
  • Optical, contactless centering
  • Fiducial finder (automatic recognition of the positions of the printed circuit board and the components)
  • Teach-in of the assembly coordinates
  • Teach-in of the component feeders



 

Technical data:

 

Overall dimensions: 1550 x 900 x 650 (without feeders)
Weight: Approx. 120 kg without packing and accessories
Mains connection: 240 V / 50 Hz / 4 A
Ambient temperature: 15°C - 40°C
Pick-and-place area: 350 x 240 mm
Component range:
place_it II vision 0603 - PLCC 68, QFP
place_it II 0402 - PLCC 84, QFP
Number of feeders: Max. 90 (45 are included in the scope of delivery)
Capacity of in-line assembly:
place_it II vision approx. 1800 components/h
place_it II approx. 2300 components/h
Dispenser capacity: Approx. 1 point/s
Set-up compression: Programmable
Angles of in-line assembly: 0 - 360° in 0.1 ° increments
Precision of in-line assembly:
place_it II vision

+/- 0.05 mm
place_it II

+/- 0.1 mm
Control of component presence: By vacuum sensor
Panel assembly: Yes
Available accessories: Dispenser station, wafer tray, linear vibration feeder, special suction nozzles

 

Software:

place_it_II_soft 

Go to top of page


© 2007 mn electronic GmbH

Design Baiba Eihenberga
HTML+PHP Ojars Krumins